• Locking/unlocking.
• Chaining/leashing.
• Bondage animations.
• Suspension (Poses)

NOTE: When unequipped, the bracelets and sides will ignore all interactions. The chaining point will also be deactivated.

• Keyless padlocks.
• Fingerprint padlocks.
• Keyed padlocks.
• Time-release padlocks.
• Lockpoint accessories (on the chaining point, only)

Handcuffs worn on the avatar will be invisible by default. In this stage, the centerpiece & the click helper can be clicked to bring up the cuffing menu.

• In Front: The wearer's wrists will be bound in front of their belly.
• In Back: The wearer's wrists will be bound behind their back.

NOTE: When the wearer cuffs himself, the handcuffs will always be “loose”, when other people cuff the wearer, the handcuffs will always be “tight”.

When the handcuffs are worn and unlocked, clicking the main body (not the keyholes) will bring up the uncuffing menu.

• Tighten: The handcuffs will be tightened, preventing the wearer from removing them on their own.
• Uncuff: The cuffs will be unequipped and RLV restrictions will be lifted. As the wearer, you can only uncuff yourself if the cuffs are loose.

NOTE: When the handcuffs are removed, any chain/lock/accessory/suspension on the leashing point will also be removed.

The handcuffs feature 4 columns of RGB LEDs on their surface, their color indicates the state of the handcuffs:

• RED: The handcuffs are locked.
• ORANGE: The handcuffs are tight, but unlocked.
• GREEN: The handcuffs are loose, but unlocked (in this state, the wearer can remove them at any time by using the “Uncuff” option).

Because of the way this product operates, there are a lot of optional configuration options to help with fitting.

Rename this notecard to configure whether the click helper mesh will be visible or hidden when the handcuffs are in their unequipped state. (The possible values are case-sensitive)

• config.clicker.hidden=Yes (hidden when the handcuffs are unequipped)
• config.clicker.hidden=No (visible when the handcuffs are unequipped)

NOTE: The click helper is designed to remain readable when highlight transparent (Ctrl Alt T) is used.

Rename this notecard to enable/disable the LED colorblind mode.

Possible values: (case sensitive)

• config.colorblind=No normal mode
• config.colorblind=Yes colorblind-friendly mode

The colorblind-mode provide an alternative color scheme.

• RED: The handcuffs are locked.
• YELLOW: The handcuffs are tight, but unlocked.
• BLUE: The handcuffs are loose, but unlocked (in this state, the wearer can remove them at any time by using the “Uncuff” option).

NOTE: This is the best I could come up with that still made sense for people without color blindness, and looked good with emission, do message me if you have a better alternative.

Cuffed front Cuffed back

Chaining the handcuffs