Differences

This shows you the differences between two versions of the page.

--- touchbound_system:shockcollar [2015/02/27 19:16] – created kyrahabattoir
+++ touchbound_system:shockcollar [2025/02/19 16:37] (current) – [RL Shocker system] kyrahabattoir
@@ Line 1: / Line 1: @@
-[[:start|<<Return to the table of content]]
 ^^ {{:touchbound_system:shockcolar-wiki.png?nolink |}} ^
 || Classic shock collar |
 ====== Supported TouchBound functions ======
-   * [[touchbound_system:locking_unlocking|Locking/unlocking.]]
+   * [[touchbound_system:locking_unlocking|Locking/unlocking]].
-   * [[touchbound_system:chaining_leashing|Chaining/leashing.]].
+   * [[touchbound_system:timepadlock|Time-release padlocks]].
-   * Bondage poses.
+   * [[touchbound_system:chaining_leashing|Chaining/leashing]].
-   * Neck pose (posture collars only)
+   * [[touchbound_system:shockcollar#bondage_poses|Bondage poses]].
-====== Remote Control ======
+   * [[touchbound_system:BACKGROUND_LOOP|Neck pose]].
-This product can be set to a radio channel and can shock the wearer remotely from 1 to 5 seconds, and also produce an audible warning.
+   * [[touchbound_system:suspension|Suspension]] ([[touchbound_system:shockcollar#suspension_poses|Poses]])
-**NOTE: It will react to any remote broadcasting on the same frequency.
 ====== Sensing zones ======
-   * In GREEN: The zone that react as the rear lock point.
+{{:touchbound_system:shockcollar-sensing.png?200|}}
-   * In RED: The zone that react as the front ring chaining point.
+====== The shock box ======
-{{:touchbound_system:linedchrome_touch.png?200|}}
+{{:touchbound_system:capture.png?nolink |}}The shock box can be opened by clicking it when the collar is unlocked. Doing so will open it's protective lid and reveal the inside.
+On the left side will be an empty socket, you can click this area to install a radio frequency module (or if one is already installed, to remove it).
+There are 200 possible frequencies, from 88.1 Mhz to 108.1Mhz, when a radio frequency module is insterted, the collar will react to any radio message sent on this channel.
+On the right side is a two positions red switch used to toggle the anti bark function on and off. The anti bark function will automatically shock the wearer based on the following criterias:
+   * Using too many uppercase letters in a chat message (more than 50%, require at least a 5 letter message.
+   * Using more letters than his average.
+The anti bark function require no specific configuration as it will automatically tune itself to the wearer's average speech "quantity" and punish him for going over the average, thus encouraging this average to drop.
+====== The remote ======
+{{:touchbound_system:remote-hud.png?nolink |}}The provided remote has 3 memory banks to save your most frequently used frequencies (click one of the green/red pips to select a slot, click the screen to change/erase the content of that slot.
+The remote can broadcast two different commands:
+   * The blue button will make the collar emit an audible "ping" without sending an actual electrical shock.
+   * The red button will trigger an electrical shock of the length set by the rotary knob at the bottom of the remote.
+The remote can be worn on HUD, or rezzed for public use (it might require resizing as HUD objects are larger than usual).
+Only the OWNER of the remote can change the content of the memory slots, but anyone can select a slot.
 ====== Supported locks ======
+   * [[touchbound_system:KeylessPadlock:|Keyless padlocks]].
    * [[touchbound_system:FingerprintPadlock|Fingerprint padlocks]].
    * [[touchbound_system:keyedpadlock|Keyed padlocks]].
+   * [[touchbound_system:timepadlock|Time-release padlocks]].
+   * [[touchbound_system:tag_plate|Lockpoint accessories]].
+====== Coloring HUD ======
+{{:touchbound_system:shockcollarhud-wiki.png?nolink&200|}}The KDC Classic shock collar come with an easy to use coloring HUD that allow you to change the color and textures of the main outer leather, the strap backing, collar padding and also the metal used for the rivets, buckles and rings.
 ====== Bondage poses ======
-This table contains all the special poses that the wrist cuffs can initiate, the source object the the first object that you click in the touch sequence, while the target object is the second object in the sequence.
+This table contains all the special poses that the shock collar can initiate, the source object the the first object that you click in the touch sequence, while the target object is the second object in the sequence.
 Some chaining combinations will offer you to add a specific bound poses, if the current avatar limb configuration allows it.
@@ Line 30: / Line 52: @@
 |  Inv. prayer   |  Collar rear lock/ring  |  Any wrist cuff  | {{:touchbound_system:inv_back.png?100|}} A very tight and high back bound pose.  |  yes  |
 |  Over head     |  Collar rear lock/ring  |  Any wrist cuff  | {{:touchbound_system:overhead.png?100|}} The wrist is bound to the back of the collar in an overhead fashion.  |  yes  |
+| Stooped | collar front shackle | belt front ring | {{:touchbound_system:stooped_pose.png?100|}} The wearer is forced to bend forward.|  N/A  |
+| Straight | collar back ring | belt back ring | {{:touchbound_system:archback.png?100|}} The wearer is forced to bend backward.|  N/A  |
+====== Suspension poses ======
+^ Source point ^ Image ^
+| Front collar ring | {{:touchbound_system:front_neck.png?100 |}} |
+| Back collar ring | {{:touchbound_system:back_neck.png?100 |}} |
+====== RL Shocker system ======
+This product can be connected to a real life remote-controlled shocker device, for those who want to take their compliance play to the next level.
+Two services are currently supported:
+  * [[https://openshock.org|Openshock]]: Opensource project with complete documentations to assemble your own (community members also sell pre-made units), fast and affordable.
+  * [[https://pishock.com|Pishock]]: The original creators behind the idea of internet-controlled shocker devices.
+===== Enabling this feature =====
+By default, the shocker function is disabled and completely hidden from view.
+====== 3rd party support ======
+The shockbox sends the following linkmessages for 3rd party developpers.
+<code>
+//When the radio module or the bark function have been engaged/disengaged.
+llMessageLinked(LINK_SET, -90000, (string)bool_radio_enabled, (key)bool_anti_bark_enabled);
+//When the user is being shocked.
+llMessageLinked(LINK_SET, -90001, (string)shock_length, "");
+</code>