Differences

This shows you the differences between two versions of the page.

--- touchbound_system:bit [2012/07/25 20:23] – [Bit position] kyrahabattoir
+++ touchbound_system:bit [2019/12/08 06:40] (current) – kyrahabattoir
@@ Line 1: / Line 1: @@
-[[:start|<<Return to the table of content]]
 ^ {{:touchbound_system:bit_presentation.png?nolink&100|}} ^
 | Rubber Bit                                    |
@@ Line 6: / Line 5: @@
    * Speech garbler.
    * Drooling.
-   * Leashing.
+   * [[touchbound_system:chaining_leashing|Chaining/leashing.]].
    * Reins.
-   * Bridle connection.
+   * [[touchbound_system:bridle_connection|Bridle connection.]]
 ====== Sensing zones ======
    * In GREEN: The zone that react as the rear lock point.
@@ Line 20: / Line 19: @@
    * [[touchbound_system:FingerprintPadlock|Fingerprint padlocks]].
    * [[touchbound_system:keyedpadlock|Keyed padlocks]].
+   * [[touchbound_system:timepadlock|Time-release padlocks]].
 ====== Inactive mode ======
@@ Line 35: / Line 35: @@
 If locked in either positions it will prevent removal and to switch back and forth between the active and inactive state.
+====== Leashing and tethering ======
+The bit has 3 sensing zones that can draw chains, two of them are lockmeister compatible and will be detected by Lockmeister furnitures.
+===== Reins =====
+{{:touchbound_system:reins.png?200 |}}If you click either of the BLUE zones on the bit and then click a valid chaining target ( another chaining ring, or a hitch point ) a double set of chains will be drawn instead of the normal TouchBound single chain. This allows a more "reins" ,like appearance for leashing and tethering.
+Both points will behave as one so the side you pick doesn't matter.
+**Unlike all the other points, the reins can be drawn from up to 10 meters away (instead of the standard 5 meters proximity restriction) to accomodate dressage and carting.**
+===== Shank rings =====
+{{:touchbound_system:tether.jpg?200 |}}Those two points act like independent Touchbound points and are identified in the lockmeister system as lbit and rbit. Each one of them has it's own chain drawing ability and locking slot.
 ====== Adjusting the bit ======
 The bits automatically save the position they are put in for both possible positions, if you would like to fine tune those positions, simply click the appropriate sensing point to toggle the desired state (active/inactive) and move the bit to the desired position. The system will remember the active and inactive position independently.
 ====== Coloring HUD ======
 {{:touchbound_system:bit_hud.png?nolink&200 |}}The gags come with an easy to use coloring HUD that allow you to change the color and textures of the straps, mouth piece and metallic parts.